In the Hoop Parker Polar Bear

Was: $19.99
Now: $9.99
Maximum Purchase:
1 unit
Adding to cart… The item has been added

Product Overview

About this Machine Embroidery Design:

 Parker the Polar Bear is made in the hoop and features all new engineering techniques!  His legs are integrated with his body making him a unique floppy sitting bear.  His arms can be sewn in or doll jointed. His head attaches with a doll joint.  Parker has a special 3 dimensional muzzle that makes him very realistic looking!  For the 4x4, 5x7, 6x10, 8x8, 8x12, and 10x14 hoops! Throw a scarf on him and he makes the perfect winter companion.

 

Size Information:

4x4 makes a 5" Tall (when sitting) Polar Bear

5x7 makes a 9" Tall (when sitting) Polar Bear

8x8 makes a 11" Tall (when sitting) Polar Bear

6x10 makes a 15" Tall (when sitting) Polar Bear

8x12 makes a 17" Tall (when sitting) Polar Bear

10x14 makes a 19" Tall (when sitting) Polar Bear

 

SUPPLIES:

-----------------------------

Embroidery Machine

Medium Tear Away Stabilizer

Water Soluable Topper

Scissors

Temporary Spray Adhesive

Minky Fabric, OR Fleece (Fabric needs a 2 way stretch)

Optional: Mochi Fabric (also called stretch velour or any 4 way velvety or suede feeling fabric)

Sewing Machine (optional to attach footpads to the feet, but not required)

Polyfil

Needle and Embroidery Machine Thread

Doll Joints for attaching the head (optionally the arms)

 

Formats:

Our embroidery machine formats include:

DST

EXP

HUS

JEF

PES

SEW

VIP

VP3

XXX

You will receive all the sizes and all of the embroidery machine formats with your purchase, so that if you ever upgrade your machine, or change brands, there is no need to re-purchase past embroidery designs from our website. We give you everything you need regardless or format or size with every design we offer on our website.

 

Basic applique instructions for our simple stitch embroidery designs are as follows:

1)  The Red lines show you where to place your applique fabric pieces, and the colored lines will stitch the fabric in place. For best results, we recommend using a light weight fusible interfacing on the back side of applique fabric pieces used in an embroidery design. An example of this would be heat-n-bond lite.

2) After each fabric piece is stitched down, you will then use small curved scissors to trim very close to the tack down line to remove excess fabric.

3) Repeat this for each piece of fabric in the design.

4) Lastly, you might have some embroidery elements to stitch out, like eyes, mouth, or wording.  We combine colors logically so reduce the number of times you will have to change out your thread color. For example, if the design is of a kitty cat, we would combine the inside of the ear with the nose of the cat making them both pink.  It is possible, however, to stop your machine after one element and change the thread should you rather have the kitty cat nose be brown, for instance.

We follow this general template for creating our designs so that you are getting all the fabric down at the beginning and can relax and do other things while the majority of the stitching is being done toward the end.  We feel this is the most efficient use of your time embroidering.

 

Basic applique instructions for our sketch filled embroidery designs are as follows:

1) There is no fabric used in these types of designs, only thread.

2) Stitch each color of the design to complete it.

3) Similiar elements are often combined when its logical to do so to reduce the number of thread changes.

4) The stitching on our sketch filled embroidery designs are low density to reduce time and materials. They are not totally filled in with a lot of stitching like many other embroidery designs available online. The stitching is still sufficient to make your design stand out on your project.

 

About Sizing

Because our embroidery designs come in multiple sizes, we do not recommend resizing our designs. Resizing a design can result in unpredictable results. When you resize a design, for example a PES file, and make it smaller, the thread count will not change proportionately. Some machine will try to fit the same number of stitches but now in a smaller footprint which can result in strange jumping, alignment issues, thread breakage, tension issues and needle breaks. The same issues can occur if you make an embroidery design larger.  Embroidery designs are not vectorized. They cannot be enlarged or shrunk down and still stitch out in the same quality as was originally digitized. And this is why our embroidery designs come in multiple sizes. We try to do most of the work for you so that you have several sizes to choose from depending on your project but without the work and worry of trying to resize it yourself.

 

Free Embroidery Designs:

If you would like to try out one of our designs, we offer free embroidery designs on our website and offer free designs on our homepage monthly. Be sure to keep an eye out for these free machine embroidery designs so you can build up your library.