Product Overview
You can make the CUTEST and SWEETEST turtle in the hoop on your embroidery machine! Thomas the Turtle is made in the 4x4 hoop and up! Thomas has a shell that can either be attached with snaps (removable) or with safety eyes (permanent) and also a shell that is worn allowing the turtle body to be removed. This option allows the shell to be swapped out and it is complete with a tummy plate. This turtle comes with arms and legs that are in two versions. If you are comfortable with a sewing machine you can use Thomas' 3D arms and legs that have feet and hand soles sewn onto the limbs. If you prefer that the arms and legs are made completely in the hoop, then Thomas also comes with a 2 Dimensional or 2D arms and legs and this method require no sewing machine work.
Thomas comes with 3 adorable faces and comes in 5 sizes!
Sizes:
===============
4X4 HOOP MAKES A 6” DOLL
1/4 YARD FABRIC
5X7 HOOP MAKES A 11” DOLL
1/2 YARD FABRIC
8X8 HOOP MAKES A 12” DOLL
1/2 YARD FABRIC
6X10 HOOP MAKES A 14” DOLL
3/4 YARD FO FABRIC
8X12 HOOP MAKES A 18” DOLL
1 YARD OF FABRIC
Supplies:
===============
Embroidery Machine
Medium Tear Away Stabilizer
Water Soluable Stabilizer
Scissors
Scotch Tape
Seam Ripper
Needle and Thread
Kam Snaps (4-8 sets)
Doll Joints
Minky, Fleece or Velour. Any 2 way (stretches in one direction more than the other) stretch fabric.
Polyfil
POLYBATTING AND IRON
Glass beads or Poly Pellets (optional)
4X4 USES (5) 10MM SAFETY EYES
5X7 USES (2) 20MM ON ARMS, (3)30MM DOLL JOINTS ON LEGS AND HEAD
8X8 USES (2) 20MM ON ARMS, (3) 35MM DOLL JOINTS ON LEGS AND HEAD
6X10 USES (2) 30MM ON ARMS AND (3) 35MM DOLL JOINTS ON LEGS AND HEAD
8X12 USES (2) 30MMON ARMS AND (3) 45MM DOLL JOINTS ON LEGS AND HEAD